Sponsor

Tuesday, 7 January 2020

Analog Instruments


Analog Instrument


Definition:

  • The analogue instrument is defined as the instrument whose output is the continuous function of time, and they have a constant relation to the input. 
  • The physicals quantity like voltage, current, power and energy are measured through the analogue instruments. 
  • Most of the analogue instrument use pointer or dial for indicating the magnitude of the measured quantity.

Classification of Analog Instruments

  • The classification of the analogue quantity depends on the number of physical quantity they measures. 
  • For example, the instrument uses for measuring the current is known as the ammeter and the voltmeter is used for measuring the voltages. 
  • The wattmeter and the frequency meter measures the power and frequency respectively.
Classification Of Analog Instruments
Classification Of Analog Instruments



The analogue instrument is classified by the type of current that can be measured. The following are the types of an electrical instrument.

  1.  Direct Current Analog Instruments
  2.  Alternating Current Analog instrument
  3.  Both Direct and Alternating current Instruments.


The analogue instruments can also be classified by showing the output of measured quantity. The different type of analogue instruments are shown below

  1.  Indicating
  2.  Recording
  3.  Integrating Instruments


Indicating Instrument – 
The indicating instruments indicates the magnitude of the measured quantity. This instrument uses the dial and pointer as an indicator. The ammeter and voltmeter belong to this category. The integrating instruments are of two types. They are

·         Electromechanical Instruments

·         Electronic Instruments

Recording Instrument – 
Such type of instruments gives a continuous reading over a specified period. The variations in quantities are recorded on the sheet of papers.

Integrating Instruments – 
The instrument which measures the summation of the electrical quantity over a given period is known as the integrating instruments.

The classification of the analogue instruments can also be done by the methods used by the instruments for comparing the measured quantity. The following are the classifications of the instrument by the methods.

1. Direct measuring Instruments – 
The instruments directly converts the measurand into energy which activates the instruments and the value of the unknown quantities measured through it. Ammeter, Voltmeter, Wattmeter and the energy meter are the examples of the direct measuring instruments.

2. Comparison Instruments – The comparison instruments measure the unknown quantity by comparing it with the standard value. The example of the comparison instruments is the ac and dc bridges.

Their accuracy may also classify the analogue instruments.

The analogue instruments can be categorised according to the principle of operation. The following are the effect uses the analogue instrument for their operation.

Magnetic Effect
Magnetic effect means the current flows through the conductor induces the magnetic field around it. For example, consider the conductor is converted into the coil. The summation of the magnetic field of the coils will behave as an imaginary magnet.
Classification Of Analog Instruments
Magnetic Field Produced By Current Carrying Coil


Thermal Effect
The measurand current passes through the heating elements increases their temperature. The thermocouple attached to the element converts the temperature into an emf. The conversion of current into an emf with the help of temperature is known as the thermal effect.  Description: force-between-current-carrying-coils.
Force Between Two Current Carrying Coils
Force Between Two Current Carrying Coils


Electrostatic Effect
The electrostatic force exerted between the two charged plates. This force is used for displacing one of the plates. The instruments which work on this principle is known as the electrostatic devices.

Induction Effect
The non-magnetic conducting disc placed in a magnetic field induces an electromotive force. This magnetic field is induced by the electromagnet which is excited by the alternating current.

The electromotive force induces the electric current insides the drums. The interaction produced by the induced current and the emf moves the disc. This effect is mostly used in the induction effects.

Hall Effect
The material produces an electric current in the presence of a transverse magnetic field. The voltage is produced between the two edges of conductors. The magnitude of voltages depends on the current, flux density and property of the conductor.




LEARN MORE:

Measuring Instruments

0 comments:

Post a comment

Popular Posts